Skip to Content
Back to Knowledge Base

SIX¶

SIX

Connecting a SIX payment terminal allows you to offer a fluid payment flow to your customers and ease the work of your cashiers.

Warning

Although Worldline has acquired SIX Payment Services and both entities utilize Yomani payment terminals, their firmware differs. Terminals supplied by Worldline are, therefore, incompatible with this integration.

Configuration

Prerequisites

  1. Install the POS IoT Six module: Activate the POS IoT Six module module to enable the payment terminal.

    Note

    This module replaces the POS Six module.

  2. Connect an IoT system: A Raspberry Pi or a virtual IoT system (for Windows OS only) is required to connect a SIX payment terminal to Odoo.

Configure the payment method

  1. Enable the payment terminal in the application settings and create a payment method for SIX terminals.

  2. Set the journal type as Bank.

  3. Fill in the Outstanding Account field.

  4. Select Terminal in the Integration field.

  5. Select SIX IOT in the Integrate with field.

  6. Click Setup Six Terminal.

Creating a new payment method for the SIX payment terminal

In the modal window,

  1. Click the IoT Box field and select the IoT system from the dropdown menu.

  2. Enter the Six Terminal ID (TID) provided by SIX.

  3. Select the Terminal Device from dropdown menu.

  4. Finally, click Add Terminal.

Configuring the Terminal ID for the SIX payment terminal

Note

Ensure the SIX terminal is online and connected to the same network as the IoT system.

Link the payment method to a POS

Once the payment method is created, it can be selected in the POS settings. To do so,

  1. Go to the POS’ settings.

  2. Add the payment method under the Payment methods field within the Payment section.

Edit on GitHub

Was this article helpful?